Summit FeverCOLORADO Sign in
San Juan · Combo route

Mount Wilson + El Diente Traverse

Mount Wilson, 14,256' · also on El Diente Peak

Mount Wilson
DifficultyClass 4
Round trip13.25 mi
Elevation gain4,800'
TrailheadKilpacker Basin
Trailhead elevation10,060'

Conditions on the summit

Loading Fetching the forecast for 14,256'…
—Summit temp now
—Sustained wind
—Gusting to
—Freezing level
Today

—

Tomorrow

—

Day three

—

Afternoon storm risk is the line that matters. Everything else is comfort. In summer, plan to be off the ridge before the build-up starts, not as it starts. Forecast for the summit point, adjusted for its elevation · data from Open-Meteo.

This is a technical climb. Falls here can be fatal. It is for experienced climbers who are comfortable on steep, exposed rock and can decide when to turn back.

Combo route · Mount Wilson + El Diente Traverse

Overview

This is one of the classic ridge traverses in Colorado. It links El Diente Peak and Mount Wilson in the San Juan Mountains. This description climbs El Diente first from Kilpacker Basin, crosses the connecting ridge, and descends Mount Wilson back into the same basin.

The traverse is rated Class 4. It has loose rock, a cluster of rock towers to work around, and a steep, narrow crux with exposure on both sides. Mount Wilson's summit block adds one more tricky spot. This route is only for experienced climbers who move well on exposed, loose terrain.

The ridge itself is only about a mile with about 500 feet of gain, but it is slow. The full day from the Kilpacker trailhead is about 13.25 miles round trip with about 4,800 feet of gain. Many parties camp in Kilpacker Basin.

Plan of the day

Start by

By 4 a.m. from the trailhead, or 5 a.m. from a camp in the basin.

Turnaround

Be on El Diente's summit by about 9 a.m. The traverse can take several hours. If the weather is not clearly stable, do not start it.

Crux

The steep, narrow section after the saddle east of West Wilson, near 14,100 feet. There is exposure on both sides. The rock pile just below Wilson's summit is a second crux.

Route-finding

Hard. Key spots are the gully off the south side below El Diente, the traverse under the Organ Pipes, the way around Pin Point, and finding the 14,150-foot notch below Wilson's summit ridge.

Water

Streams in Kilpacker Basin. None on the ridge. Carry 3 liters and filter.

Getting to the trailhead

Trailhead

Kilpacker Basin

Find it on a map

Leave Telluride heading south on Colorado 145 and cross Lizard Head Pass. About 5.5 miles beyond the pass, make a right onto Forest Road 535.

Take this 2WD dirt road a bit more than 5 miles; the Kilpacker trailhead is on the right and has a sign.

Before you go

Check these the week of your climb.

Official forecast

The National Weather Service forecast for the summit area, hour by hour. Look for thunderstorm chances and wind above treeline.

NWS point forecast →

Directions to the trailhead

Kilpacker Basin. Road conditions near the trailhead change after storms. Check your clearance and have a backup plan for a lower lot.

Get directions →

Roads and highways

Closures, construction and winter conditions on the highways that get you there.

COtrip road conditions →

Closures and fire rules

Trail closures, fire bans and other alerts from the Forest Service in Colorado. For the latest on your trailhead, call the local ranger district.

Forest Service alerts →

Snow on the route?

From fall through early summer, any snow slope can slide. Check the avalanche forecast before you go.

Avalanche forecast →

Cell signal

Most trailheads and many summits have little or no signal. Check coverage near the trailhead and carry a satellite messenger or beacon if you can.

FCC coverage map →

Conditions change the route

This describes the route in its usual season. Distances and elevations are close estimates for planning. Snow, ice, rockfall, a washed-out road or an afternoon storm can make it a very different climb. Check recent conditions the week you go and turn around when the day tells you to.